15-18g Extrusion Twin Screw Laboratory Micro Extruder Special High
Temperature Polymer Material
Characteristics of the Twin Screw Laboratory Micro Extruder Special
High Temperature Polymer Material
1. low consumption,
2. high quality screw and barrel (38CrMoAlA, nitriding), long
service time.
3. with PLC control, full automatic, easy operation.
4. wide use, with different molds, different use.
5.specially design, with wheel, convenient to move.
Key technical parameters of Twin Screw Laboratory Micro Extruder
| Key technical parameters | SJZS-7A | SJZS-10A | SJZS-10B | GJZS-10 series |
| Screw diameter (small/big head)(mm) | 7/25 | 10/30 | 10/30 | 10/33 |
| Length of screw thread mm | 190 | 250 | 250 | 340 |
| The screw rotation speed rpm | 70 | 51 | 51 | 51 |
| Barrel form | Can open | Can open | Can open | Can not open |
| Main motor power(kw) | 0.55 | 0.75 | 0.75 | 0.75 |
| Cyclic extrusion dosage (g/time) | 5-10(automatic control) | 15-18(automatic control) | 15-18(automatic control) | no |
| Direct extrusion dosage (max kg/h) | 0.45 | 1.5 | 1.5 | 1.5 |
| Heating temperature (max ℃) | 450 | 450 | 450 | 450 |
| Feed I power | 25 | 25 | 25 | 25 |
| Feeder quantity | 1 | 1 | 2(customization) | customizable |
| Power of vacuum exhaust and dehumidifier (W) | no | no | 180(optional) | 180(optional) |
| Nitrogen protection | Have | Have | Have | Have |
| Overall dimensions (mm) | 800x350x580 | 860x350x580 | 860x380x580 | 820x350x580 |
Our company is a professional manufacturer of polymer experimental
equipment, specializing in the production of experimental plastic
extruder, plastic injection molding machine, twin screw extrusion
melt spinning machine, micro extrusion tube, micro profile, micro
grain cutter and experimental double station automatic bottle
blowing machine, micro sheet, micro film, micro melt-blown and
other products. The company is also the first one successfully
research and developed laboratory mini twin screw extruder and
laboratory mini injection molding machine series products with
leading level at home and abroad. The main performance indexes of
the micro-extruder and micro-injection molding machine series have
reached and surpassed the similar foreign products in many aspects,
and they have high cost performance. They are ideal imported
substitute products, especially suitable for the laboratory
research of universities and enterprise R&D departments. At
present, in addition to the domestic universities, scientific
research units, company R&D department, our equipment also
exported to the United States, Canada, Russia, Saudi Arabia,
Azerbaijan and other countries.
